Mistakes to avoid in an electrical control panel can prove fatal for the people working around it. If you are not too familiar with how electrical control panels work and how they can kill a person, then you should think twice before you try to do experiments on the system. If you are not familiar with the warning signals, then chances are high that you might burn your hands while trying to fix something on the device. Here, we are listing some of the top mistakes to avoid in an Electrical Control Panel.
Mistake No 1 is ignoring the safety indication for the device.
As mentioned earlier, any kind of experiments done on the device must be done with the help of an answerable power supply or a dead cell. You should not play around with the device if the power indicator goes off.
Mistake No.2 is having no knowledge about electricity or its working.
Even if you have built the device yourself, you must still know about it because electricity is something very dangerous when you do not know how to use it properly. Do not take chances when you are using the device. If the device is damaged, you might end up causing more harm to yourself than you expected.
Mistake No.3 is connecting the device into the electric grid.
Before connecting anything to the electric grid or the wall, make sure that the device is safe to do so. Some devices will need you to remove the battery first to see whether it will work. Check the connection points as well to ensure that there are no problems with it.
Mistake No.4 is changing the batteries in the device.
You should only ever use those that you are absolutely sure can handle high current usage. Never switch the batteries to a lower capacity than they are meant for. This can lead to serious accidents, especially if the device is not meant to accept lower currents.
Mistake No.5 is changing a panel or connects the device into an incompatible device.
The first thing you should do when connecting a device to the panel is to test the connection first. If you find that the device cannot connect correctly, then this might be a problem. This can either be due to incompatibility of the device or wiring issue.
Mistake No. 6 is replacing a burnt-out fuse on the electrical control panel.
When you notice that a fuse has burnt out, quickly change the fuse and inform the panel repair technician. It is important that you have a professional replace the fuse because this can cause severe damage if the fuse is still lit when there is already a malfunction with the device.
Mistake No. 7 is the improper connection to the power source.
Sometimes, the panel may get accidentally disconnected from the power source. In most cases, such connection problems should be addressed immediately. You may need to use a different cable or switch if the current cable is inadequate.
Mistake No. 8 is the use of the wrong fuse type.
Fuses play important roles in maintaining the safe and proper operation of the device. A common error in using fuses is they are blown. This may cause a fire and may even short-circuit the circuit. You have to make sure that all the fuses are in good condition and properly marked.
Mistakes to avoid in electrical control panel repair are easy to avoid once you are aware of what to look for. By being aware of the signs, it will be easier for you to know what to do when a mistake happens. If you notice any of these mistakes while you are working, it is best that you do not do the repair right away. Take time to get information about the problem and do some troubleshooting before doing the actual repair.
These are just some of the mistakes to avoid in electrical control panel repair. Make sure that you follow all the necessary instructions and do not shortcut in doing the task. Keep your devices and wiring in good condition to prevent any inconveniences. If all these factors are followed, you will have no electrical problem in your device.
