If you are reading this, you already know the tremendous usefulness of air compressors around the world. Air compressors have been used in industries worldwide to run various tools and machines without the help of an extra hand. Most modern-day compressors are noisy and bulky looking, which makes them less attractive to business owners and contractors who want to maximize their air compressor usage. The biggest problem with air compressors is that they tend to leak when they are not being properly maintained.
Noise – Air compressors usually generate loud noises that can be very distracting. This can ruin other parts of your workspace or even the ambiance of your business. If you have a construction project at hand, noisy compressors can be a big distraction to your workers and hinder their concentration and focus. noisy compressors can also be a safety hazard. Construction sites are usually the noisiest of all business locations. This is because they need to constantly pump air to circulate through the building materials and increase productivity.
Another common problem with air compressors is that they tend to leak. You might think that all air compressors are created equal; however, that’s not the case. Some types of compressors are better than others, specifically the rotary screw compressor, which tends to leak less than any other type of air compressor. This is because the rotary screw compressor has a gearbox that reduces the noise generated by the motor and allows it to run at a lower speed.
Dryer Problems – When you have to use dryers in the compressor room, there is always the potential for someone to leave the dryer on. This can create a huge problem with the air flow coming through the venting system. It’s best to either have an exhaust fan or run the dryer ceiling to increase airflow. This will prevent the dryer from overheating. This is especially true if you use a gas dryer.
Annoyance – One complaint that almost every individual has with air compressors is the annoying sound that they produce. They can be loud enough to drive a person crazy. The worse part about these noises is that they don’t usually go away. A good rule of thumb is to find a solution to the annoying noise. Some air compressors have volume controls that can be used to make them quieter.
If you’re dealing with noisy air compressors, you may want to consider replacing them. If you don’t replace them, you risk damaging the parts or creating additional noise. If you do want to keep the noisy parts, invest in high quality bearings. These bearings reduce the noise production. The higher quality the bearing, the quieter the compressor will be for years to come.
